Line Array System – Marco Audio

The compact design allows a very tight coupling of the individual components which ensures an uniform vertical dispersion, 75-degree constant directive horizontal dispersion pattern is maintained down to 500 Hz, while the vertical HF dispersion of 15-degree which allows the MCL210 to be used to construct vertical columns that produce a curved coherent wave front.

The mechanical and acoustical design of the cabinet enables vertical splay angles to be set between 0-degree & 14 degree.

MCL-210 cabinets can therefore be used in vertical configurations starting from two cabinets with a 15 degree to 30-degree dispersion & up to 12 cabinets with fully user & venue defined vertical profile.

Total Power: 5200 W RMS up to 1100 people

Monitor power : 800W

INCLUDES :

• 8pcs Marco MCL210
• 2pcs Marco ML18 SUB
• 1pc Marco DSM48
• 2pcs Marco MR1200
• 1pc Marco MR1600
• 2pcs Marco MFL-210
• 4pcs Marco LTD12
• 2pcs Marco MR800

Specification :

Marco MCL210

Driver 2×10″LF + 1×1.3″ HF

Impedance 8 ohm

Freq. Response 80Hz – 18KHz

Power Rating 400 / 800W

Sensitivity 100dB

Max. SPL 130dB

Coverage (angle) 75 x 15 (HxV)

Size(WxHxD)mm 580*310*400

Weight (Kg) 22

Marco ML 18 SUB

Driver 1×18″LF

Impedance 8 ohm

Freq. Response 40Hz – 150kHz

Power Rating 800 / 1600W

Sensitivity 102dB

Max. SPL 132dB

Coverage Omni

Size(WxHxD)mm 580*493*670

Weight (Kg) 42

Marco DSM 48

4in 8out, digital speaker management system high performance 32 bit with Digital Sound Processor, 6 band parametric equalizer, delay, crossover, processing delay, limiter of each outputs channel, 4 balanced input, 8 balanced output, RS485 & USB connectors, with software easy control

Marco MR-1200

Power Amplifier, 2 HU, 19″

2 x 600W @ 8 ohm Bridge 1800W , 8 ohm

2 x 900W @ 4 ohm Bridge 2000W, 4 ohm

2 x 1100W @ 2 ohm

Marco MR-1600

Power Amplifier, 2 HU, 19″

2 x 800W @ 8 ohm Bridge 2000W , 8 ohm

2 x 1200W @ 4 ohm Bridge 2400W, 4 ohm

2 x 1400W @ 2 ohm

Marco MFL 210

Flying hardware for MCL210 and ML18SUB

Marco LTD12

Driver 1×12″LF + 1.75” HF

Impedance 8 ohm

Freq. Response 52Hz – 180kHz

Power Rating 350 / 700W

Sensitivity 98dB

Max. SPL 123dB

Coverage 80 x 50

Size(WxHxD)mm 398*571*365

Weight (Kg) 24

Marco MR-800

Power Amplifier, 2 HU, 19″

2 x 400W @ 8 ohm Bridge 1000W , 8 ohm

2 x 600W @ 4 ohm Bridge 1200W, 4 ohm

2 x 800W @ 2 ohm

OPTION

2 x 19″ 8U Freight case with double door rack

Cable set

Speaker cable

6 x 15m with Neutrik speakon plug (from amplifier link up to MCL210 & ML18sub)

4 x 2m with Neutrik speakon plug (for two MCL210 by both side in parallel use)

4 x 20m with Neutrik speakon plug (from monitor amplifier MR800 link up to stage LTD12)

Signal cable

4 x 5m balanced canon male to female plug (from mixer master & monitor output link up to DSM48 processor)

8 x 0.5 m balanced canon male to female plug (from DSM48 processor output link up to amplifier MR1200, MR1600 & monitor amplifier MR800 input)

Line Array System with option freight case and cable   RRP USD52,047-